Warranty

Warranty Policy | All Make Parts
🕒 Last Updated: November 2026
WARRANTY POLICY

Standard protection and coverage guidelines for your used auto parts.

Our Warranty Guarantee: All parts supplied by All Make Parts undergo thorough quality inspections before shipping. We stand behind our Grade "A" inventory with reliable warranty protection to give you peace of mind.
1

STANDARD WARRANTY COVERAGE

Unless otherwise specified on your invoice or quote, All Make Parts provides a standard 30-day limited warranty on eligible mechanical and structural used auto parts, starting from the date of delivery.

  • The warranty covers functional defects and internal mechanical failure under normal operating conditions.
  • Parts must be installed by a certified ASE mechanic or professional automotive repair facility to maintain warranty validity.

2

ENGINES & TRANSMISSIONS

For major drivetrain components, specific guidelines apply to ensure proper operation:

  • Used Engines: Covered against block cracks, head gasket failure, and excessive oil consumption or low compression. Warranty applies strictly to the long block assembly (cylinder head(s) and block). External accessories (e.g., alternators, water pumps, intake manifolds, injectors) are left for convenience and are not covered under the engine warranty.
  • Used Transmissions: Covered against internal gear failure, slipping, and hydraulic pressure loss. Torque converters must be replaced or thoroughly flushed during installation.

3

WHAT IS NOT COVERED

Our limited warranty does not cover failures or damage caused by the following conditions:

  • Improper installation, negligence, abuse, racing, or off-road use.
  • Overheating, lack of proper lubrication, low fluid levels, or using incorrect fluids.
  • Damage caused by faulty external components (e.g., radiator failure causing engine overheating).
  • Electrical parts, modules, sensors, and wiring harnesses (sold strictly "as-is" with no warranty unless stated otherwise).
  • Normal wear items such as gaskets, seals, belts, spark plugs, filters, and water pumps (these should be replaced prior to installation).
Notice: Removing heat tabs, disassembling the part, or altering identification markings immediately voids all warranty coverage.

4

INSTALLATION REQUIREMENTS

To validate and keep your warranty active, professional installers must complete the following maintenance steps upon installation:

  • Flush and replace engine oil, fluids, coolant, and filters using OEM-specified grades.
  • Replace high-failure maintenance items such as rear main seals, timing belts/chains (where applicable), and thermostat.
  • Retain all professional repair shop invoices showing proof of new fluids, filters, and installation labor.

5

HOW TO FILE A CLAIM

If you experience a mechanical issue or suspected defect covered under warranty, follow these steps:

  • Contact our support team immediately at 1-855-299-1511 before removing the part or initiating repairs.
  • Provide your original invoice number, VIN, and a written diagnosis report from a certified repair facility detailing the mechanical failure.
  • If a replacement or repair is approved, an RMA will be issued for the return of the defective component.

6

LABOR & ADDITIONAL COSTS

Our warranty covers the replacement of the defective part or a refund of the purchase price (at our discretion). Under no circumstances does All Make Parts cover or reimburse:

  • Mechanic labor costs for installation or removal.
  • Towing charges, diagnostic fees, or rental car expenses.
  • Incidental or consequential damages resulting from part failure.

7

WARRANTY SUPPORT

Have questions about your coverage or need assistance filing a claim? Reach out to our team:

READY TO FIND YOUR PART?

Get an instant quote — zero-headache parts & pricing from our inventory to your cart.

```html
☎ Call Now ▤ Get a Quote
```